Document Actions
Installation
The installation is in principle very simple: The
control center is only attached over an PoE adapter at the 230V-Stromnetz. At
the PoE adapter (power of over Ethernet) can be put in additionally a cable for
the Internet connection.
The sensors work in principle slackly and can be placed in the dwelling at your will. With a selector switch one gives, which devices in an area do belong together. They are integrated afterwards fully automatic into the control, as the center is shifted into the configuration mode.
The sensors work in principle slackly and can be placed in the dwelling at your will. With a selector switch one gives, which devices in an area do belong together. They are integrated afterwards fully automatic into the control, as the center is shifted into the configuration mode.
The actuators (net curtain motor controls, dimmer,
etc.) can be installed - permit so far it the national installation regulations
- by your self. Also they are assigned to an area with a selector switch. Tracers or switches
for the operation of the actuators can be shifted either again, it can however
usually also the past switches (inclusive wirings!) further to be used.
For the expert installation of the actuators we recommend to take the assistance up of a licensed electroinstallator. An automation system can be also gradually developed and extended by the modular structure and the automated configuration. A first installation in an existing 5 1/2 room dwelling can take place in such a way in two to three hours.
For the expert installation of the actuators we recommend to take the assistance up of a licensed electroinstallator. An automation system can be also gradually developed and extended by the modular structure and the automated configuration. A first installation in an existing 5 1/2 room dwelling can take place in such a way in two to three hours.